|
|
- The FloaterCoater is the roller coater of the future for the metal stamping industry today. It is constructed of stainless steel and with rolls that float with the movement of the coil stock. Manifolds dispense lubricant to the surface of the rolls where it is transferred in an even coating to the coil stock. The FloaterCoater is a computer controlled roller coater that disperses the correct amount of lubricant on each cycle of the press. Manifolds can be shut off if a particular strip of the coil stock does on need lubrication, thus saving on lubricant cost. Rolls are held in such a manner that they can be removed and installed in minutes. All of the features of the FloaterCoater were designed for delivering the most controlled lubrication to the surface of coil stock while still giving the operator ease of operation and maintenance of the system.
Sturdy construction.
Resists rust.
Will maintain its new look years after heavy use.
Electronically controls lubricant to the rolls.
User controls when and how much lubricant is dispensed
Dispensing heads uniformly distribute lubricant over each roll.
Manifolds are individually controlled and can be turned On/Off for Selective Strip Lubricating.
Can handle heavy honey oils down to synthetics and vanishing oils.
Lubricant rolls can be removed in less than two minutes.
Fast Start-up After Setting Overnight or a Weekend
Manual button allows lubricant to re-coat the rollers surface in less than a minute.
Multiple Reservoirs with quick-change fittings store different lubricants for fast change-over when necessary.
Most change overs require no cleaning. If cleaning is required it can be accomplished in less than 10 minutes.
Using less lubricant - reduces lubricant cost.
Using less lubricant - reduces part cleanup cost.
Using less lubricant - reduces plant maintenance cost.
 |
