HTML Menu by Css3Menu.com

 

A Low Level Controls
Can give a visual or sound signal if fluid is low. Can also be tied into the controls to shut the press down if lubricant is low.
E155 Four Gal. Reservoir
E158 Eight Gal. Reservoir
E165 Fifteen Gal. Reservoir

B FC7310 Diaphragm Pump
Used to move fluid to the FloaterCoater

C FC2125 On/Off Valve used to open and close the rolls

D E421 Solenoid
Use valve to control the flow of fluids not air

E E230 Solenoid Valve
24V valve-Use for controlling the flow of air P912 Solenoid Valve
110V valve-Use for controlling the flow of air

F Proximity Sensor Cable
Extenders Allow Proximity Sensor to be moved an extended distance from the Controller
MX1350 10’ Extender Cable
MX1351 15’ Extender Cable

G Manifold Cable Extenders
Allows Manifolds to be moved an extended distance from the
Controller.
MX1301 6’ Extender Cable
MX1303 15’ Extender Cable
MX1305 60’ Extender Cable

H MX9330 PortaCart and Reservoir ONLY.
A portable cart to carry and
transport a variety of LSP
controller systems.

I Reservoir / Pump Modules
Modules are pre-assembled supply systems, including any of the following: Diaphragm Pump, Reservoir, Lubricant On/Off Valve, or Roller Open/Close Valve.
 

 

 

 

 

 

 

 

 

 

lsp floater coater roller lubrication system
LSPHeader Floater Coater Accessories

HOME | PRESSPRAY I | PRESSPRAY II | COMPUSPRAY | MAXAMIZER | METERMIZER | MINAMIZER | FLOATER COATER | MINICOATER | B-COATER | BLASTMATIC | MIST COOLANT | SOFT HEAD HAMMERS


LSP Industries, Inc.  | 5060 27th Avenue |  Rockford, IL 61109  |  Tel: 815.226.8090  |  Fax: 815.226.9250  |  e-mail:sales@lspind.com