HTML Menu by Css3Menu.com

 

The MeterMizer consists of miniature Lubricant Ejectors, Oscillating Timer, Reservoir, On/Off Valve, Manifold and remote Nozzles with Coaxial Tubing. Lubricant Ejectors, are stacked to the underside of the Manifold. The Reservoir is inserted into the top of the Manifold and shop air enters the On/Off Valve at the side of the Manifold. A Bleeder Valve under the bottom Ejector is opened and Lubricant enters the Manifold and moves on to the Ejectors where it fills the Lubricant Chambers in each Ejector. The Bleeder Valve is closed. When the On/Off Valve opens shop air enters the Manifold and is split in two directions. Some of the air goes to the Oscillating Timer and the rest is directed out the nozzle. The air directed to the Oscillating Timer redirects the air to the Lubricant Ejectors in pulses.

metermizer - how it works
metermizer - ejector

These pulses can be increased or decreased in frequency. Each pulse activates the Lubricant Ejectors by pushing a Piston forward, displacing a preset volume of lubricant past a Check Valve and into the inner tube of the Coaxial Tubing. The lubricant moves to the Nozzle tip in measured volumes. When the inner tube is full, on the next pulse, it ejects one measured drop of lubricant into the air stream being expelled out of the outer tube of the Coaxial Tubing. The Air and lubricant are carried to the work area.

 


HOME | PRESSPRAY I | PRESSPRAY II | COMPUSPRAY | MAXAMIZER | METERMIZER | MINAMIZER | FLOATER COATER | MINICOATER | B-COATER | BLASTMATIC | MIST COOLANT | SOFT HEAD HAMMERS


LSP Industries, Inc.  | 5060 27th Avenue |  Rockford, IL 61109  |  Tel: 815.226.8090  |  Fax: 815.226.9250  |  e-mail:sales@lspind.com