Recommended for Smaller Stock Sizes

A pressurized reservoir supplies lubricant to the MiniCoater. A mechanical clamp on the top of the Minicoater is used to open the rolls. Coil stock is placed through the rolls and the clamp is then engaged, causing the rolls to close on the coil stock.

A Solenoid located under the Reservoir is set to open and close at a programmed count. Every time the solenoid opens lubricant is deposited on to the rolls. A unique manafold system allows for sectioned lubrication manifolds for sections.

The volume of lubricant dispensed is determined by how often and/or how long the Solenoid Valve is kept open. Two needle valves are used to give selective volume control to either top and/or bottom rolls.