HTML Menu by Css3Menu.com

 


A E-315 Electronic Counter
Can be used in place of the E-310 Electronic Pulsator. Sends repetitive signals to send lubricant to the
MiniCoater. These signals are from one in ninety nine hours to 300 per minute. The timer is not tied to the cycles of the press but is tied into the ON/OFF cycle of the press. The controller is attached to an external
switch on the press and is activated and stays on as long as the press is cycling. When the switch is in the OFF mode the Timer stops cycling. For use on high speed presses, roll formers and other similar equipment.

B E-912 Solenoid Valve (110V)

C E-230 Solenoid Valve (24V)
An alternative method of controlling lubricant to the
MiniCoater. Attaches to the press PLC.

D MC-312 1 Gallon Reservoir
Reservoir can be mounted either higher or lower than
the MiniCoater. Pop-off Valve holds pressure at under 30 PSI. Clear plastic allows visual sight of volume.

 

lsp minicoater roller lubrication system
LSPHeader MiniCoater Accessories

HOME | PRESSPRAY I | PRESSPRAY II | COMPUSPRAY | MAXAMIZER | METERMIZER | MINAMIZER | FLOATER COATER | MINICOATER | B-COATER | BLASTMATIC | MIST COOLANT | SOFT HEAD HAMMERS


LSP Industries, Inc.  | 5060 27th Avenue |  Rockford, IL 61109  |  Tel: 815.226.8090  |  Fax: 815.226.9250  |  e-mail:sales@lspind.com