HTML Menu by Css3Menu.com

lsp mist coolant

 


Coolant Systems for Machining

The LSP MagnaMist is used for all types of cutting tool lubricating operations such as grinding, sawing , milling, drilling, tapping and others. Whatever your metal removal requirements are, chances are there is a LSP Mist Coolant System that can dramatically improve the quality and productivity of your operation.

Pin Point Cooling
Dispense an air driven spray mist exactly at the point of contact between the cutting tool and the work piece. Velocity of the mist prevents the tool from slinging it away before it can do its job.

Optimum Cooling
Efficiently dissipates heat created during heavy, high speed cutting Mist cools as it expands upon release from the nozzle. When it comes in contact with the heat from the cut, water in the mist evaporated, taking heat away.

Convenience
Systems can easily be installed without interfering with the work or operator areas. A variety of units in different sizes and confugrations make this possible..

Better Visibility
Fine,transparent mist has the velocity to resist slinging even at high speeds. That means splash guards and shields aren;t required, allowing your operator to view the operation without interference.

Precise Control
External controls allow easy, yet precise, adjustment by hand..

No Mess
Adjustability allows the operator to set the unit so that ecess fluid is kept to a minimum.


lsp mist coolant sytems

The LSP Mist Coolant System efficiently dissipates heat during high speed cutting tools. The combination of air mixed with a small amount of coolant blows the chips away and the evaporation of the coolant on the hot tool cools the tool down.

LSPHeader Floater Coater Features
 

 

 

 

 

 

 

 

HOME | PRESSPRAY I | PRESSPRAY II | COMPUSPRAY | MAXAMIZER | METERMIZER | FLOATER COATER | MINICOATER | BLASTMATIC | MIST COOLANT | SOFT HEAD HAMMERS


LSP Industries, Inc.  | 5060 27th Avenue |  Rockford, IL 61109  |  Tel: 815.226.8090  |  Fax: 815.226.9250  |  e-mail:sales@lspind.com