Adapts to the BlastMatic Ejector, BlastMatic Manifold, Proximity Switch, Actuator Switch and One-Way Trip Bracket.
Twice as large as the P-905 magnet, with two 10/32" tapped Holes.
A 110 volt solenoid that attaches to the Basic Blastmatic. This solenoid is wired directly into the press cycle or programmable press control.
Use on special applications; adapts to any pipe with a 1/8" female NPT. Nozzle tip only with 1/8" male NPT.
Use on special applications; adapts to any pipe with a 1/4" female NPT. Nozzle tip only with 1/4" male NPT.
