 |
||
|
Mechanical and Electronic Options for Activating the Systems Three basic actuators are available for cycling the PresSpray Ejector. The basic actuators consist of a mechanical actuator that triggers when a part of the press moves a whisker. A solenoid valve receives a signal from a limit switch and then activates the PresSpray. Or a pneumatic timer that works on a cycle unrelated to the stroke of the press. It actuates on a predetermined time cycle. Four feet of tubing tie the Actuating Systems to the Ejector. Choose whichever is best for your application. |
|
| Four Electronic Controllers are available for actuating the PresSpray Ejectors. These controllers are completely self contained units that require no additional parts or electrical work to install. Simply tab in the actuation cycle. It is not necessary to adjust and readjust a cam, switch or other tipping mechanism to synchronize the spraying of lubricant to coincide with the cycle of the press. A magnetic proximity switch receives a signal and activates the controllers. Once a job has been completed the controller has the ability to save the job to memory and can be easily recalled, thus saving valuable setup time. | ||
|
|
|