 |
||
|
Spray Patterns, Applications and Accessories Nozzles come in an assortment of spray patterns. Each has a Check Valve that prevents dripping of lubricant after it has been dispensed from the nozzle. Check valves built into the nozzle tip make for a short nozzle and are ideal when building the nozzles right into the die. Our standard checks are a little longer and provide an area to hold them with the P-925 Nozzle Bracket Holder. These standard nozzles are the most commonly used. FlexTubes and MagnaTubes extend the nozzles’ flexibility. Twelve inches of flexible hose allow the user to position the nozzles close to the work area while locating the mounting back from the nozzle. |
|
|
Accessories add versatility to the nozzle setups. Use a Nozzle Bracket Holder to hold a Basic Spray Nozzle in place. The holder allows 360° positioning of the nozzle in any direction. The Swivel Bracket can be permanently positioned or attached to either of the Magna Bases. The magnetic bases speed up the positioning of the nozzles especially during die changes. When multiple nozzles are needed, the two port or four port manifold can be used. LSP High Pressure tubing will give the best spray pattern and is the only type of flexible tubing used on nozzle installations. Here are the accessories available for use with our nozzle assemblies. | |
|
||