E-315 Electronic Counter
Can be used in place of the E-310
Electronic Pulsator. Sends repetitive
signals to send lubricant to the
MiniCoater. These signals are from one
in ninety nine hours to 300 per minute.
The timer is not tied to the cycles of
the press but is tied into the ON/OFF
cycle of the press. The
controller is attached
to an external
switch on the press
and is activated and
stays on as long as
the press is cycling.
When the switch is in
the OFF mode the
Timer stops cycling.
For use on high speed presses, roll formers
and other similar equipment.
E-912 Solenoid Valve (110V)
E-230 Solenoid Valve (24V)
An alternative method of controlling
lubricant to the
MiniCoater. Attaches to the press PLC.
MC-312 1 Gallon Reservoir
Reservoir can be mounted
either higher or lower than
the MiniCoater. Pop-off Valve
holds pressure at under 30
PSI. Clear plastic allows
visual sight of volume.
