Features How it Works Specifications Accessories Application

A pressurized reservoir supplies lubricant to the MiniCoater. A mechanical clamp on the top of the MiniCoater is used to open the rolls. Coil stock is threaded through the rolls and the clamp is disengaged causing the rolls to close on the coil stock.

A Solenoid located under the Reservoir is set to open and close at a programmed count. Every time the solenoid opens lubricant is allowed to be deposited on to the rolls.

The volume of lubricant dispensed is determined by how often and/or how long the Solenoid Valve is
kept open. Two needle valves are used to give selective volume control to either top or bottom rolls.