The amazing MeterMizer is a positive displacement lubricating spray system. It operates in unison with, or independent of, the cycle of the machine and dispenses lubricant to the piece in either one fast instantaneous burst or multiple bursts of lubricant, as needed.
After lubricant is dispensed during the cycle, the shop air will continue to
remove chips until the next lubricant dispersion or until shut off.
*Reduces lubricant cost.
*Reduces cleanup cost in the work area.
*Reduces cleanup cost of finished parts.
*Cools, cleans and extends the life of all abrasive wheels.
*Automatic, frees operator from lubrication interruptions.
*Dispense lubricant in an airless metered drop upon command
*Dispense lubricant into a stream of air with pulsating action.
*Lubricant is dispensed on a programmable count of the machine cycles.
*Lubricate bearings at multiple locations on a prearranged time cycle.
*Operate using a solenoid valve controlled by an electrical switch or a PLC.
*Lubricates, cools and removes chips from machining applications.
*Lubricate parts during automatic assembly to eliminate marring of parts.
Every ejector on every MeterMizer unit includes a twelve
inch FlexTube on a Magnetic
Base, standard nozzle assembly
and 10 feet of coaxial tubing.
As shown in the inset image above, the MeterMizer can also deliver a drop of lubricant without an air assist when required. Used in assembly applications or for chain lubrication.
XL Systems use the MeterMizer-SA inserted in security enclosures.
Standard models are available with one, two or three ejectors.
Available with Oscillating Timers or Solenoid Valves and with Reservoir or
without. Comes with Manifold, Ejectors, Manual On/Off Valve and Nozzle with Magnetic Base
and 10’ Coaxial Tubing for each Ejector.
(Magnets to hold the box in place are ordered separately.)
SA systems are designed as stand alone systems.
Available with Oscillating Timers or Solenoid Valves and with Reservoir or without. Comes with Manifold, Ejectors, Manual On/Off Valve and Nozzle with Magnetic Base and 10’ Coaxial Tubing for each Ejector.
Applications requiring larger volumes of lubricant will be
better served with a larger Reservoir. These resevoirs
are usually remote form the MeterMizer and attached
with five feet of plastic tubing.
The MeterMizer-SC for single cycles is designed to deliver lubricant and air together in quick
short actuations upon command. A single Solenoid Valve is used to dispense air from the
Nozzle Tip and actuate the Ejector at the same time to dispense a predetermined amount of lubricant
into the air stream As soon as the Solenoid Valve is shut off the air will stop the system
is ready for its next cycle.
This system is perfect for stamping, assembly, chain lubrication and other applications.
The MeterMizer-BG is designed to handle additional Ejectors for the larger jobs where more
nozzles are needed to complete the application. Large Reservoirs for the larger applications. Install
REMOTE from the MeterMizer. Comes with 5 feet of tubing to connect between Reservoir and MeterMizer.
Smaller Reservoirs, for the applications where Ejectors are not actuated as frequently, such as tapping or
chain lubrication, attach DIRECTLY to the MeterMizer.
Includes:
One Oscillating Timer or One Solenoid Valve, Manual On/Off Valve,
One Nozzle, FlexTube, Magnetic Base and 10’ of Coaxial Tubing per Ejector.
Reservoir and operating actuators are not included and must be ordered
separately.
With Solenoid Valve Custom Assembled MeterMizers SA or BG assemblies
mounted on special brackets. All plumbing and wiring in place
and integrated for single line connections. Specify:
MeterMizer Systems to be mounted on Brackets
Nozzle specifications
Manual On/Off Valves or Solenoid Valve for air in port
Permanent Screw type installation or Magnetic Base installation
Other accessories available upon request.
MeterLube is a family of environmentally safe lubricants recommended for use in the MeterMizer.
MeterLube products are formulated from natural environmentally safe resources. They are safe
because they are a renewable resource and a natural part of the environment. They have a useful
life and then are readily biodegradable in a safe and beneficial manner. The MeterLube is not
only safe to the environment it is also safe for the employees. It is economical to use, leaves a
good finish on the work piece, extends the tool life and is easy to remove.
There are several MeterLube products available. Each having features that are unique to specific
applications. Find the right one for your application.
MeterLube A-413-A
A non-smoking lubricant, formulated for jobs that generate a lot of heat.
MeterLube A-193-A
Economical to use. A medium to heavy duty lubricant. Capable of doing most of
the heavy duty jobs while providing good fl ow and shedding.
MeterLube A-260-B
The premium ashless lubricant. Medium duty, low viscosity high purity lubricant.
Will not oxidize and burns off clean in heat treating.
MeterLube 6737
Most economical low viscosity ashless lubricant. Use when a heat treating follows
the forming application. Gives a total burn-off and an ashless residue.
